Set The Measurement Unit, Date And Time - Omron VIVA Instruction Manual

Before using the unit

4. Set the Measurement Unit, Date and Time

time or after replacing the batteries.
• Date and time can be set from "OMRON connect" app as well.
1.
Press the button to turn on the power.
"kg&cm" blinks on the display.
2.
Set the measurement unit.
Press the button to adjust and press the
• The default measurement unit is "kg & cm".
• You can set the measurement unit to "lb & inch" or "st-lb & inch".
3.
Set the unit to the correct date and time.
Press the button to adjust and press the
•
• Time is 24-hour system.
• During setting the year, date, hour and minute, hold down the
advance rapidly in increments of 10.
After all the settings for the measurement unit, year, month, day, hour and
NOTES
• If any mistake is made during the setting, press the
power and start from "Step 1" again.
•
anew.
• To modify the measurement unit, date or time, remove the batteries and wait for at least 20 seconds.
Then insert the batteries and reset again.
7
button to
Year
Month
Day