1.
When you step onto the unit, the power automatically turns on.
2.
When personal number and measurement results are displayed, the measurement
is completed.
3.
■ If your personal number is correct...
Press the
number.
results are recorded on the unit as the measurement
value linked to the displayed personal number.
■ If your personal number is incorrect...
number with the
button to
■
again.
If "no 1" to "no 4" blinks on the display, or
GUEST is displayed, your personal data has
not been registered in the unit.
Register your personal data.
You can use Guest Mode as well.
11
disappears.
button, and then press the
blinking, the
button so that you can select your personal number
or