Enterasys SmartSwitch 2200 Management Supplement page 28

802.1q vlan user’s guide local management supplement

Hide thumbs Also See for SmartSwitch 2200:

Table of Contents

Protocol Port Configuration Screen

Assigning Ports to the VLAN Forwarding List

NOTE: The ports can only be added to the VLAN Forwarding List of an existing VLAN.

If the VLAN does not exist, it must be created before the ports can be assigned to the

VLAN Forwarding List.

1. Use the arrow keys to highlight the SET PORTS TO VLAN FORWARDING field.

2. Press the SPACE bar to toggle the SET PORTS TO VLAN FORWARDING field to YES. NO

is the default setting.YES will add all ports set to YES to the VLAN Forwarding List of the

VLAN shown in the Protocol Information field.

NOTE: To remove a port from the VLAN Forwarding List, use the VLAN Forwarding

Configuration screen described in the 802.1Q VLAN User's Guide

3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4. Press ENTER. The message "SAVED OK" displays and the setting is saved.

2-16

Local Management Screens

Table of Contents

Smartswitch 6000