Enterasys RoamAbout AP-2000 Hardware Installation Manual page 57

4. If the remote BootP option was not selected, use the Browse button next to the File
field to locate the latest N*.BIN file for firmware upgrades or R*.BIN file for
BootROM upgrades.
5. Click on the Reload Now button. NetRider Loader starts (if you did not specify to use
your TFTP server).
6. Click Yes to confirm the upgrade, then click OK to reconfirm the upgrade.
7. AP Manager displays a Poll dialog box that prompts you to poll the AP. Polling lets
you know when the upgrade is complete.
CAUTION: Use the Poll dialog box to determine when the upgrade is
complete. The NetRider Loader application only indicates when the file
copy is completed, it does not indicate when the upgrade is complete.
8. Click Yes in the Poll dialog box to start the poll. You will receive a "Reload Status =
Success" message when the upgrade is complete. The upgrade takes approximately
one minute. AP Manager prompts you to reset the AP after the upgrade is complete.
9. Click Yes to reset the unit.
Upgrade Firmware
A-3