To ensure that you have the latest information, check the web site:
www.enterasys.com/products/wireless.
Caution: Changes or modifications made to this device which are not expressly
approved by the party responsible for compliance could void the user's authority
to operate the equipment.
Precaución: Cualquier cambio o modificación a este dispositivo sin la aprobación
del organismo autorizado, puede anular el derecho del usuario a operar el equipo.
Achtung: Änderungen oder Modifikationen, die an diesem Gerät ohne
Zustimmung der verantwortlichen Partei vorgenommen werden, können die
Berechtigung des Benutzers zum Betrieb des Geräts ungültig machen.
Note: You must be running RoamAbout R2 Wireless Access Platform firmware
Version 6.xx, or higher, to use the 802.11a/b/g radio card. The RoamAbout AP
Manager Kit 11.06, or higher, contains the latest firmware. To download the latest
version of firmware, go to
1. To install the RoamAbout R2, refer to the RoamAbout R2 Wireless Platform
Hardware Installation Guide.
2. Refer to the Regulatory and FCC requirements located in this document
before you install the radio card into the RoamAbout R2.
3. Ensure that the power to the RoamAbout R2 is off.
4. To install the Radio Card, perform the following steps:
a.
Carefully insert the card into the radio card slot.
b. Press down firmly to seat the card. The following figure shows two radio
cards inserted into the RoamAbout R2 (with the mezzanine option).
Radio Card Installation
ww.enterasys.com/software/RoamAbout/APMAN
802.11a/b/g Radio Card Installation Guide 21
Radio Card Installation