Brother MFC-J1300DW Online User's Manual page 617

Level 1
Wi-Fi Direct
NFC
(MFC-J1300DW)
Message from
Brother
Web Connect
Settings
Network I/F
(MFC-J1300DW)
WLAN Enable
(DCP-J1100DW)
IPsec
Network Reset
[Print Reports]
[Settings] > [All Settings] > [Print Reports]
Level 1
XMIT Verify
(MFC models)
Level 2 Level 3
PIN Code -
Manual -
Group Owner -
Device Device Name
Information
SSID
IP Address
Status Status
Information
Signal
I/F Enable -
- -
Message from -
Brother
Status -
Proxy Settings Proxy
Connection
Address
Port
User Name
Password
- -
- -
- -
- -
Descriptions
Print a Transmission Verification Report for your last transmission.
Level 4 Descriptions
- Configure your Wi-Fi Direct network
settings using WPS with a PIN code.
- Configure your Wi-Fi Direct network
settings manually.
- Set your machine as the Group Owner.
- View your machine's device name.
- View the Group Owner's SSID.
When the machine is not connected, the
LCD displays Not Connected.
- View your machine's current IP Address.
- View the current Wi-Fi Direct network
status.
- View the current Wi-Fi Direct network
signal strength.
When your machine acts as Group
Owner, the LCD always indicates a
strong signal.
- Turn the Wi-Fi Direct connection on or
off.
- Turn the NFC function on or off.
- Display messages and notifications from
Brother.
-
- Change the Web connection settings.
-
-
-
-
- Select the network connection type.
- Turn wireless network connection On or
Off.
- IPsec is an optional security feature of
the IP protocol that provides
authentication and encryption services.
We recommend contacting your network
administrator before changing this
setting.
- Restore all network settings back to the
factory settings.
610