Brother MFC-J1300DW Online User's Manual page 613

Level 1 Level 2
Wi-Fi WPS w/ PIN Code
WLAN Status
MAC Address
Quiet Mode -
Tray Setting Paper Type
(MFC-J1300DW)
Paper Size
(MFC-J1300DW)
Paper Type -
(DCP-J1100DW)
Paper Size -
(DCP-J1100DW)
Fax Preview -
(MFC-J1300DW)
All Settings -
[General Setup]
[Settings] > [All Settings] > [General Setup]
Level 1
Maintenance
Paper Type
Paper Size
Check Paper
Quiet Mode
Beep
(DCP models)
Volume
(MFC models)
LCD Settings
Screen Settings
Level 3
-
-
-
-
-
-
-
-
-
-
Level 2 Level 3
Improve Print -
Quality
Print Head -
Cleaning
Ink Volume -
Ink Cartridge -
Model
Print Setting Reduce
Options Smudging
Slow Drying
Paper
- -
- -
- -
- -
- -
Ring -
Beep -
Speaker -
Backlight -
Dim Timer -
Scan Screen -
Descriptions
Configure your wireless network settings using WPS
with a PIN.
View the current wireless network status.
View the machine's MAC address.
Decrease printing noise.
Set the type of paper in the paper tray.
Set the size of paper in the paper tray.
Set the type of paper in paper tray #1.
Set the size of paper in paper tray #1.
View received faxes on the LCD.
Configure the detailed settings.
Descriptions
Check and correct the print quality, alignment and
paper feeding according to the LCD instructions.
Clean the print head according to the LCD
instructions.
Check the available ink volume.
Check your ink cartridge numbers.
Reduce smudging on the paper or paper jams
during printing.
Use this setting when printing with a type of plain
paper on which the ink dries very slowly.
Set the type of paper in the paper tray.
Set the size of paper in the paper tray.
Check the paper type and paper size when you pull
the tray out of the machine.
Decrease printing noise.
Adjust the beeper volume.
Adjust the ring volume.
Adjust the beeper volume.
Adjust the speaker volume.
Adjust the brightness of the LCD backlight.
Set how long the LCD backlight stays on after the
last finger press.
Set the default Scan screen settings.
606