Brother MFC-J1300DW Online User's Manual page 615

Level 1 Level 2
Setup Receive Fax Rx Stamp
Report Setting XMIT Report
Journal Period
Print Document -
Remote Access -
Dial Restriction Dial Pad
(MFC-J1300DW)
Address Book
(MFC-J1300DW)
Shortcuts
(MFC-J1300DW)
LDAP Server
(MFC-J1300DW)
(Available only for some
countries.)
Remaining Jobs -
Miscellaneous Distinctive
(For some countries)
FaxAbility
(For New Zealand only)
Call Waiting
(For New Zealand only)
[Network]
[Settings] > [All Settings] > [Network]
Level 1
Wired LAN
(MFC-J1300DW)
Level 2 Level 3
TCP/IP BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
Level 3 Descriptions
- Print the received time and date on the top of received
faxes.
- Select the initial setup for the Transmission Verification
Report.
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes,
you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
- Print received faxes stored in the machine's memory.
- Set your own code for Remote Retrieval.
- Set the machine to restrict dialling when using the dial
pad.
- Set the machine to restrict the dialling when using the
Address Book.
- Set the machine to restrict the dialling when using a
Shortcut.
- Set the machine to restrict dialling when using LDAP
search.
- Check which scheduled jobs are in the machine's memory
and cancel selected jobs.
- Use with telephone company distinctive ringing service
allows you to have a voice number and fax number on the
one phone line.
- If you have FaxAbility from Telecom, use this function to
store the ringing pattern of your fax number.
And if you set in to On, you should use the registered
number only.
- If you have Call Waiting service, use this function to
answer second call when you are on the phone and
someone rings you.
Level 4 Descriptions
-
-
-
-
-
-
-
Select the Boot method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
608