Download Print this page

New Holland T3.60F Service Manual page 13

Hide thumbs Also See for T3.60F:

Advertisement

INTRODUCTION
Spring pins
When fitting split socket elastic pins, ensure that the pin notch is positioned in the direction of the force required to
stress the pin.
Spiral spring pins do not require special positioning.
Spare parts
Use genuine parts only.
Only genuine spare parts guarantee the same quality, duration and safety as they are the same parts that are assem-
bled during production.
Only genuine parts can offer this guarantee.
When ordering spare parts, always provide the following information:
• Tractor model (commercial name) and frame number.
• Engine type and number.
• Part number of the ordered part, which can be found on the "Spare Parts Catalogue", which is the base for order
processing.
Notes for equipment
The tools that NEW HOLLAND offer and illustrate in this manual are:
• Specifically researched and designed for use with NEW HOLLAND vehicles.
• Necessary to make a reliable repair.
• Accurately built and strictly tested to offer efficient and long-lasting working means.
By using these tools, repair personnel will benefit from:
• Operating in optimal technical conditions.
• Obtaining the best results.
• Save time and effort.
• Working in safe conditions.
Important notes
Wear limit values indicated for certain parts are recommended, but not binding. The terms "front", "rear", "right-hand"
and "left-hand" (when referred to different parts) are intended as seen from the driving position with the tractor in the
normal direction of movement.
Moving the tractor with the battery removed
External power supply cables should only be connected to the respective positive and negative cable terminals, using
efficient clamps that guarantee adequate and secure contact.
Disconnect all services (lights, windshield wipers, etc.) before starting the vehicle.
If the tractor electrical system requires checking, carry out operations with the power supply connected. Once check-
ing is completed, disconnect all services and switch off the power supply before disconnecting the cables.
51553302 19/11/2018
8

Advertisement

loading

This manual is also suitable for:

T3.70fT3.80f