Connect And Pair; Connect To Pc; Configure Usb Adapter; Pair To Mobile Device - Plantronics Poly Voyager 4300 UC Series User Manual

Connect and pair

Connect to PC

Configure USB adapter

Pair to mobile device

Your Bluetooth USB adapter comes pre-paired to your headset.
Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
1
The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB
2
adapter. If you are wearing your headset you hear "PC connected" to indicate the connection has
been established. When on a call, the LED on the USB adapter flashes blue. When not on a call the
LED is solid.
Load Poly Lens Desktop App by visiting poly.com/lens. This allows you to customize your headset
3
behavior through advanced settings and options.
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music,
you will need to configure your Bluetooth USB adapter.
Windows
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound
1
> Playback tab. Select Poly BT700,
To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
2
Communications tab and select the desired parameter.
Mac
To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On
1
both the Input and Output tabs, select
To put your headset in pair mode, slide and hold the Power
1
until you hear "pairing" and the headset LEDs flash red and blue.
Activate Bluetooth on your phone and set it to search for new devices.
2
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth On > Scan for devices*
NOTE *Menus may vary by device.
Select "Poly V43XX Series."
3
Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing.
set it as the Default Device and click OK.
Poly BT700.
switch away from the off position
5