Plantronics M100 - Bluetooth Headset Manual

The gel eartip and speaker click into matching grooves so the eartip doesn't move out of place during use.

The loop on the gel eartip should point away from the headset. (Do not rotate the eartip too far.)

MIX AND MATCH FOR BEST FIT

If the gel eartip feels loose or tight in your ear, then change it. To replace the medium gel eartip for small or large, pull the loop of the gel eartip to remove it. (Don't pull on the speaker base and stem.)

Using your thumb, tuck the bottom of the eartip over the speaker and pull the loop of the eartip over the speaker. (Don't push the speaker through the gel eartip.)

If you aren't familiar with this style of gel eartip, clip on the earloop to the stem for extra stability.

VIDEO TUTORIAL:
www.plantronics.com/M100fit

Plantronics M100 supports multipoint technology, which allows you to use one headset with two different Bluetooth mobile phones.

To pair your headset to a second phone, see "Connect to Your Phone."

How to Initiate a Call

When multipoint is on, the headset controls initiates or redials a call from the phone that last made an outgoing call.

To use the second paired phone instead, make the call using the controls on that phone. The second phone activates its link with the headset.

NOTE: The headset cannot place a current call on hold while answering a call from the second phone.

How to Answer a Call While Talking on the Other Paired Phone

To answer a second call on the other phone, the current call must be terminated or transferred back to the first phone. To transfer the call, see "Take a Good Look."

To answer the incoming call and terminate first call, simply tap the Call button.

If you choose not to answer, the second call will go to voice mail.

Pair/Connect Just Once

Pairing is a one-time process unless your phone loses the connection or you want to pair a new phone.

Watch for Flashing Red LED

This headset will visually warn you when your battery is low and needs to be recharged.

Continue a Call Without the Headset

If you need to continue a call without using your headset, just press the Call button for 1 second and the call transfers back to your phone. You will hear a tone to confirm the transfer.

Stay Near Your Phone

Bluetooth has a working "range" of up to 33 feet between the phone and headset before audio degrades and the connection is lost.

Know How to Reconnect

Your headset tries to reconnect a lost connection. If it can't, then tap the Call button once or manually reconnect via the phone's Bluetooth device menu.

Reset if You Cannot Reconnect

If your headset was working but now won't connect, remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often.

Simply turn your phone off and remove the battery for a few seconds, then replace the battery and turn it back on again. If this does not resolve the issue, delete the pairing information for your M100 headset and pair it with your phone again.

Sound Your Best

For best voice pickup, always check that the headset points towards the corner of your mouth.

SPECIFICATIONS