Connect And Pair; Connect To Pc; Configure Usb Adapter; Pair To Mobile Device - Plantronics Voyager 4200 UC series User Manual

Connect and pair

Connect to PC

Configure USB adapter

Pair to mobile device

Your Bluetooth USB adapter comes pre-paired to your headset.
Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.
1
The USB adapter LED flashes blue and then turns solid blue to indicate the headset is connected to
2
the USB adapter. If you are wearing your headset you will hear "PC connected" to indicate the
connection has been established. When on a call, the LED on the USB adapter will flash blue.
When not on a call the LED will be solid blue.
OPTIONAL Load Plantronics Hub for Windows and Mac by visiting plantronics.com/software. This
3
will allow you to customize your headset behavior through advanced settings and options.
Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music,
you will need to configure your Bluetooth USB adapter.
Windows
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound
1
> Playback tab. Select Plantronics BT600,
To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >
2
Communications tab and select the desired parameter.
Mac
To configure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On
1
both the Input and Output tabs, select
To put your headset in pair mode, slide and hold the Power
1
until you hear "pairing" and the headset LEDs flash red and white.
Activate Bluetooth on your phone and set it to search for new devices.
2
• iPhone Settings > Bluetooth > On*
• Android Settings > Bluetooth: On > Scan for devices*
NOTE
*Menus may vary by device.
Select "PLT V4210 Series / PLT V4220 Series."
3
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing.
NOTE
Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously;
this includes the Bluetooth USB adapter.
set it as the Default Device and click OK.
Plantronics BT600.
switch away from the off position
5