Important Notes; Notes On Safety - Fujitsu ETERNUS JX40 S2 Operating Manual

2

Important Notes

2.1

Notes on Safety

In this section you will find information that you must note when using the
storage subsystem.
This device complies with the relevant safety standards for IT equipment.
I
The following safety notes are also provided in the "Safety notes and
other important information" manual. Also pay attention to the notes in
the operating manual of the connected PRIMERGY system.
If you have any questions relating to setting up and operating your system in the
environment where you intend to use it, please contact your sales outlet or our
customer service team.
V
CAUTION!
● The actions described in these instructions should only be performed
by technical specialists. Equipment repairs should only be performed
by service personnel. Any unauthorized openings and improper
repairs could expose the user to risks (electric shock, energy
hazards, fire hazards) and could also damage the equipment. Please
note that any unauthorized openings of the device will result in the
invalidation of the warranty and exclusion from all liability.
● Transport the device in its original packaging or in other suitable
packaging which will protect it against shock or impact.
Read the notes on environmental conditions in
●
Data" on page 12
● If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
Check that the rated voltage specified on the type label is the same
●
as the local line voltage.
ETERNUS JX40 S2
before setting up and operating the device.
Operating Manual
section "Technical
15