Figure 21: Removing/Installing A 2.5" Hard Disk Drive - Fujitsu ETERNUS JX40 S2 Operating Manual

Removing/Installing Hard Disk Drive/Drive Dummy

Figure 21: Removing/installing a 2.5" hard disk drive

Figure 22: Removing/installing a 3.5" hard disk drive
Removing a hard disk drive
Ê Check drive position in ServerView RAID and set the drive make offline
Ê Press the green push button of the disk drive and open the lock lever.
Ê Hold the lock lever and pull the disk drive.
Installing a hard disk drive
V
CAUTION!
The hard disk drive must be acclimatized in its operating environment for
an acclimatization time.
44 Operating Manual
Hard Disk Drives
ETERNUS JX40 S2