Installation
Mounting positions
The following picture shows the mounting positions, screws and cage nuts of
two subsystems one upon the other in a PRIMECENTER Rack.
Rear Side of the Rack
rear left**
2. U*
1. U*
2. U*
1. U*
Legend
*:
height units (U) counted starting from the bottom line of the subsystem
**: "rear left" and "rear right": seen from the rear side of the rack
"front left" and "front right": seen from the front side of the rack
: M5 cage nut
: M5 screw with centering washer ("mounting spring")
: Tapered mounting bolts at the rear rail ends
Figure 3: Mounting positions
ETERNUS JX40 S2
rear right** (with support bracket)
2. U*
1. U*
2. U*
1. U*
Operating Manual
Front Side of the Rack
front left**
2. U*
2. U*
1. U*
1. U*
2. U*
2. U*
1. U*
1. U*
Rack mounting
front right**
2. U*
1. U*
2. U*
1. U*
27