Fujitsu ETERNUS JX40 S2 Operating Manual page 48

SAS Connection
1
Figure 23: SAS connections of an ETERNUS JX40 S2 I/O module (Mini SAS HD ports)
1. SAS IN port
2. SAS OUT port
Ê Set up the data connection between the server and the storage subsystem
by inserting the Mini SAS HD plug of the SAS cable coming from the server
into the SAS IN port connector of the ETERNUS JX40 S2 storage
subsystem.
I
The cable tab must always be located at the lower side of the plug.
Figure 24: Orientation of the Mini SAS HD plugs
Ensure that the plug engages securely to the SAS connector. Only in
this way can the flow of data between the server and the storage
subsystem be guaranteed.
For removing the SAS cable, the blue tab needs to be pulled out.
48
2
Operating Manual
Connections
ETERNUS JX40 S2