Viessmann Vitosol-F Installation Instructions For Contractors page 2

Flat-plate collector for installation on collector supports collector supports with fixed angle of inclination

Hide thumbs Also See for Vitosol-F:

Safety instructions

Please follow these safety instructions closely to

prevent accidents and material losses.

Safety instructions explained

Please note

This symbol warns against the risk of material

losses and environmental pollution.

Target group

These instructions are exclusively intended for quali-

fied contractors.

Regulations to be observed

■

National installation regulations

■

Statutory regulations for the prevention of accidents

Statutory regulations for environmental protection

■

Codes of practice of the relevant trade associations

■

All relevant safety regulations as defined by DIN, EN,

DVGW, VDE and locally applicable standards

ÖNORM, EN and ÖVE

SEV, SUVA, SVTI, SWKI and SVGW

Note

Details identified by the word "Note" contain additional

information.

Work on electrical equipment may only be carried

■

out by a qualified electrician.

■

The system must be commissioned by the system

installer or a qualified person authorised by the

installer.

Table of Contents

Vitosol-fm Sv Sh