Viessmann Vitosol-F Installation Instructions For Contractors page 11

Flat-plate collector for installation on collector supports collector supports with fixed angle of inclination

Hide thumbs Also See for Vitosol-F:

Installing the collectors

Installation information

■

The side with the type plate must be on the outside

of the first and last collector (see label).

On just one of the collectors, fit the pipework at the

■

side opposite the type plate side.

Please note

The connection pipes must be free of any signs

of damage.

Lubricate O-rings only with the special valve

grease provided.

Fig. 11

(cont.)

Use the template as an aid for installing the second

collector and all others between the supports. Once

the second collector has been secured, remove the

template and install it between the next pair of sup-

ports.

Table of Contents

Vitosol-fm Sv Sh