Table of Contents
Advertisement
ORIGINAL INSTRUCTIONS
GB
USED SYMBOLS
READ THESE INSTRUCTIONS
USE EYE PROTECTION
ONLY USE THE CHARGER INDOORS
DOUBLE INSULATION (NO EARTH WIRE
REqUIRED)
BATTERIES MAY ExPLODE WHEN DISPOSED
OF IN FIRE, SO DO NOT BURN BATTERY FOR
ANY REASON
STORE TOOL/CHARGER/BATTERY IN
LOCATIONS WHERE TEMPERATURE WILL NOT
ExCEED 50°C
DO NOT DISPOSE OF THE CHARGER
TOGETHER WITH HOUSEHOLD WASTE
MATERIAL
DO NOT DISPOSE OF THE BATTERY
TOGETHER WITH HOUSEHOLD WASTE
MATERIAL
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
!
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
a . Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b . Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c . Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
a . Power tool plug must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS.
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b . Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
c . Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d . Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e . When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f .
If operating a power tool in a damp location is
unavoidable, use an earth leakage circuit breaker (ELCB)
protected supply. Use of an earth leakage circuit breaker
reduces the risk of electric shock.
PERSONAL SAFETY
a . Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b . Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c . Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d . Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e . Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f .
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
g . If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust related hazards.
POWER TOOL USE AND CARE
a . Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b . Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
8
Advertisement
Table of Contents
