Note: When installing the M.2 solid-state drive Gen 3 and the heat sink, remove the film that covers the
thermal pad (if any).
M.2 solid-state drive bracket
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove these parts in order, if any:
• "Computer cover" on page 61
• "Front bezel" on page 62
• "Drive bay assembly" on page 64
• "M.2 solid-state drive Gen 3" on page 70
Removal steps
72
M70s Gen 2 and M90s Gen 2 Hardware Maintenance Manual