Thermal Sensor; Front Io Bracket And Power Button - Lenovo ThinkCentre M90s Gen 2 Hardware Maintenance Manual

Removal steps

Thermal sensor

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove these parts in order:
• "Computer cover" on page 61
• "Front bezel" on page 62
• "Drive bay assembly" on page 64
2. Disconnect the thermal sensor cable from the system board.
Removal steps

Front IO bracket and power button

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove these parts in order:
• "Computer cover" on page 61
.
Chapter 6 Hardware removal and installation
81