Headset Alert Tones - AT&T TL7900 User Manual

Getting started
Quick reference guide - headset

Headset alert tones

One long beep
One short beep every
30 seconds
Two beeps
Two low beeps
Two rapid beeps
every 20 seconds
Three rising beeps
Three rapid beeps
every 20 seconds
Three rapid beeps
•
The headset is ready to take your voice
command. (The voice command feature is
only available when TL7900 is registered to
a TL7910/TL7912 headset base. You have to
install the AT&T Softphone Call Manager
before using this feature. For installation and
operation instructions of the software, refer
to the Installation and Operation Guide
which can be found in the CD-ROM in the
TL7910/TL7912 package. You may also visit
www.telephones.att.com/downloads
to download it.)
•
The microphone is muted.
•
Error alert tone.
•
The ringer volume has reached its lowest
setting.
•
The listening volume has reached its highest
or lowest setting.
•
The speaking volume has reached its highest
or lowest setting.
•
Any key is pressed while the headset is out
of range.
•
Call waiting alert tone.
•
Low battery warning.
•
A conference call has started.
•
The headset is out of range.
•
The headset is not yet registered.
•
The headset is powering on or off.
3