Table of Contents
Advertisement
Operation
Headset operation
Caller ID announce
The voice command feature is only available when TL7900 is
registered to a TL7910/TL7912 headset base. This feature lets
you know who is calling without having to look at the display.
You have to install the AT&T Softphone Call Manager on your
computer to use the Caller ID announce function. The software is
available in the CD-ROM which comes with the TL7910/TL7912
package. You may also visit
downloads
For detailed instructions of the caller ID announce feature, refer to
the Installation and Operation Guide. It is available in the
CD-ROM which comes with the TL7910/TL7912 package or the
web site stated, as mentioned above.
Temporary ringer silencing
Press MUTE/
VOICE
earpiece. This silences the ringer without disconnecting the call.
The next incoming call rings normally at the preset volume.
Call waiting
If you subscribe to call waiting service offered by your telephone
service provider, and someone calls you while you are already on
a call, you hear a call waiting alert tone.
•
Press down the FLASH switch at the top of
the headset to put your current call on hold
and answer the new call.
Press the FLASH switch again at any time to
•
switch back and forth between calls.
to download and install the software.
to temporarily silence the ringer in the headset
www.telephones.att.com/
25
Advertisement
Table of Contents
