Table of Contents
Advertisement
Installation
Delivery and Inspection
All Blodgett ovens are shipped in containers to
prevent damage. Upon delivery of your new oven:
Inspect the shipping container for external dam-
D
age. Any evidence of damage should be noted
on the delivery receipt which must be signed by
the driver.
Uncrate the oven and check for internal dam-
D
age. Carriers will accept claims for concealed
damage if notified within fifteen days of delivery
and the shipping container is retained for in-
spection.
Part Description
Main oven body
Oven support/with caster
(2 locking, 2 non-locking)
Left conveyor belt support assembly
Right conveyor belt support assembly
Upper end plug assemblies
Lower end plug assemblies
Rolled wire belt**
Crumb pan
Nozzles
Window assembly
Air flow plate removal handle
The Blodgett Oven Company cannot assume
responsibility for loss or damage suffered in
transit. The carrier assumed full responsibility
for delivery in good order when the shipment
was accepted. We are, however, prepared to
assist you if filing a claim is necessary.
The oven can now be moved to the installation
site. Check the following list with Figure 2 on page
3 to be sure all items were received.
Qty.
1
Packet containing:
(for oven supports)
4*
Packet containing: flat & lock washers
(for oven supports)
1
Packet containing:
1
(2) 10 amp. motor circuit fuses,
2
(2) 2 amp. control circuit fuses
2
Packet containing: conveyor belt master
links**
1
Extra piece of wire conveyor belt**
2
Owner's manual
11
Return air diverters
1
NOTE: *
1*
**
4
Part Description
3
/
"-16 bolts
8
not shown on Figure 2
Two of these items are included for
dual belt models
Qty.
1*
1*
1*
1*
1*
1*
2
Advertisement
Table of Contents
