Table of Contents
Advertisement
INSTALLATION
FG39-1 Conversion Kit #360-968 from NG to LPG
Conversion Kit for NG to LPG Model #360-968
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION !!
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION!
Conversion Kit contains:
Qty.
Part #
Description
1
904-529
5/32" Allen Key
1
904-641
Burner Orifi ce #50
1
918-590
"Converted to LPG" label
1
908-528
Red "LPG" label
1
910-037
#30 ULPG Pilot Orifi ce
1
918-578
Instruction Sheet
1) Shut off the gas supply and unplug the
power cord.
2) Open the front door and carefully remove
the logs and lava rock.
3) Remove burner.
4) Remove burner orifi ce with a 1/2" wrench
and discard. Use a wrench to hold on to
the elbow behind the orifi ce.
5) Reinstall new burner orifi ce LPG stamped
#50 and tighten.
18
918-578
(refer to page 1 for PG121-1 / PG131-1)
6) Pull out the pilot hood by hand.
Pilot
Hood
Pilot
Hood
removed
Pilot
Orifi ce
7) Remove the pilot orifi ce with the allen key.
Burner Orifi ce
PG121-1 / PG131-1 / FG39-1
8) Put in the new LPG orifi ce with the allen
9) Place the pilot hood back on.
10) Adjust the burner areation setting to fully
11) Remove the pedestal back cover by remov-
Regency FG39-1 FireGenie Freestanding Gas Stove
3
key. Then put back the pilot hood.
open and install the burner.
ing the 4 Phillips screws.
12/20/06
Advertisement
Table of Contents
