FUTABA T4GRS-24G Manual page 21

Using the fuel down timer
(Preparation)
Select the setting item "TYPE" using the (JOG) button.
Press the (+) or (-) button and select "DOWN".
1
(Alarm time setting)
Select the setting item "ALRM" using the (JOG)
button and set the alarm time with the (+) or (-)
button.
2
(Alarm start/restart operation)
When the switch ("TIMER") set by function select switch
function is pressed, the timer starts. When the same switch
("TIMER") is pressed while the timer is operating, the timer is
reset and simultaneously restarted. (Restart)
- Linking start only to the throttle stick
Select the setting item "RST" using the (JOG)
button and press the (+) and (-) buttons simul-
taneously for about 1 second. When the set
beeps and the status display switches from
"RST" to blinking "RDY", the system enters
the stick operation ready state.
When the stick is operated in the forward direction, the timer
starts. (Status display "RUN")
If the (JOG) button is pressed while the timer is operating,
the LCD returns to MENU2 screen.
3
(Timer reset operation)
Select a status display ("RUN") using the
(JOG) button and press the (+) and (-) buttons
simultaneously for approximately 1 second.
A beeping sound is generated and "RST" ap-
pears on the status display and the timer re-
sets.
106
Timer Function "TIMER"
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons si-
multaneously (approx. 1 sec) to
return to the HOME screen.
Alarm time (ALRM)
OFF, 1 ~ 99 m
Initial value: 5 m
Switches
Timer start / restart
Status display
RST :Reset state
RDY :Throttle stick operation wait
RUN :Timer running
STP : Timer stopped
Status display
RST :Reset state
RDY :Throttle stick operation wait
RUN :Timer running
STP : Timer stopped