Siemens 8BT2 Installation And Operating Instructions Manual page 22

Other accessories
Fig8. Test unit for capacitive interface and indicators
22
Wall-mounting holder for the storage of operating tools
(optional)
• Wall mounting holder for accessories
• Touch up set for paint damages
• Lubricants
• Earthing accessories for ratings
• 64 pole connecting cable, length: 3m
• Test equipment for the pressure switch
• KP incandescent lamp voltage indicator with operating rod 12kV
• HV HRC fuse links
• Cable lugs / adapter systems
• Surge arresters
• HR voltage indicators
• Test units to check the capacitive interface and the voltage indicators (fig8)
• Phase comparison test units for capacitive voltage indicators type EPV-HR (e.g. Pfisterer,
including 2HR-LRM adapters and storage bag) (fig9)
Revision 04 * INSTALLATION AND OPERATING INSTRUCTIONS 8BT2 * 881-4027.9
31.5kA
Fig9. Test unit for phase comparison