Scanning statement values
Press the following keys:
1.
for the "Main menu".
2.
for "Solar".
3. OK
to confirm.
4.
for "Statement".
"Statement"
"Colmax"
"Col2max"
"Cylmax"
"Cyl2max" to
"Cyl4max"
"Relay 1" to "Relay
7"
"Days"
To reset the values, except value for
days in operation:
Whilst the value is displayed, press the
following keys:
1. OK "Delete?""Yes" is displayed.
Calling up the heat amount
Press the following keys:
1.
for the "Main menu".
2.
for "HM".
3. OK
to confirm.
Explanation
Maximum collector temperature in °C
Maximum collector temperature in an additional collector ar-
ray in °C
Maximum cylinder temperature in °C
Maximum cylinder temperature for additional consumers
(e.g. 2nd DHW cylinder) in °C
Hours run of the actuators connected at the relay (e.g. solar
circuit pump at R1)
Days in operation, solar control unit
Scanning options
5. OK
to confirm.
6.
/
for the following statement val-
ues, subject to system equip-
ment level.
7.
until the "Main menu"
appears.
2. OK to confirm
4.
for "HM 1" or "HM 2".
5. OK
to confirm.
6.
/
for the following values, subject
to system equipment level.
9