Scanning options
Calling up the heat amount
7.
until the "Main menu"
appears.
"HM ..."
"Tflow"
"Tretn"
"Heat"
"Heat"
"Heat"
Note
Add the heat values together.
The values are not calibrated.
If there is a power failure, the displayed
value showing the heat amount may be
up to 6 hours old.
To reset the heat amount values:
Whilst the value is displayed, press the
following keys:
1. OK "Delete?""Yes" is displayed.
2. OK to confirm
10
Explanation
Flow temperature in °C
Return temperature in °C
Heat amount in Wh
Heat amount in kWh
Heat amount in MWh
(cont.)