Table of Contents
Advertisement
BSC Installation and Operation Manual
MENU BASICS
(ADJUST/SELECT).
ADJUST/SELECT knob. This will either save the selection, or bring up a new screen
to make further changes to that menu item.
BACK button will return you to the previous screen without saving any changes.
STAGE button will bring the Stage menu to the display. See Stage Settings on
page 24.
descending order. See Moving Around the Stages on page 24.
menu of the current stage. See Moving Around the Stages on page 24.
cause both the old and new value will be displayed.
BACK button will return you to the previous screen without saving any changes.
selection to memory and return you to the previous menu.
hold press the ADJUST/SELECT knob for at least three seconds. While holding the ADJUST/SELECT knob down, pressing the
NEXT button will scroll the display through the different settings including the communication settings.
THE MAIN DISPLAY
on the application. The OD represents the current Outdoor Sensor value. The SYS
represents the current System Sensor value.
current operation.
example, the Lead Stage shown is <A>.
modulation status below.
DISPLAY STAGE MODULATION STATUS
DISPLAY MESSAGES
The BSC normal display layout reserved the second line from the top for message indications. The following is a list of the most
12
USING THE MENUS
ADJUST and PRESS TO SELECT
PREV. button will scroll through the Stages in a
NEXT. button will always bring the display to the Mode
DJUST/SELECT knob. Rotating the knob will
ADJUST/SELECT knob. This will save the
page 20.
Lag Delay on page 20.
---
<A>
This pointer shows the currently
selected item
<B>
<C>
The BACK button returns to a
previous menu without changing
the selection
BACK
Pressing
ADJUST
The ADJUST/SELECT knob
saves the selection to memory
PRESS TO
and returns to a previous menu
SELECT
Rotating
ADJUST
The ADJUST/SELECT knob
moves the pointer up and down
PRESS TO
selections
SELECT
OD=54F
SYS=148F
-- NETWORK PANEL --
<A>
B
C
100% 50%
---
HELP
PREV.
STAGE
24.
24.
8.
ADJUST
PRESS TO
D
SELECT
OFF
BACK
NEXT
24.
11.
7.
13.
Advertisement
Table of Contents
