Transporting The Unit - Stihl SP 92 T Instruction Manual

English

Transporting the Unit

STIHL power tool models with the letter
T in their designations have a split drive
shaft for compact transportation.
Disconnecting the Drive Tube
Unhook the shoulder strap from the
N
carrying ring.
Place the machine on the ground so
N
that it rests on the machine support
and gearbox or the tines,
3
2
1
Loosen the wing screw (1) – do not
N
remove it.
Pull the front drive tube (2) out of the
N
coupling sleeve (3).
16
4
Fit the cap (4) on the end of the front
N
drive tube.
NOTICE
Make sure the ends of the drive tube are
clean.
Connecting the Drive Tube
Pull the cap off the front drive tube
N
and keep it in a safe place.
Put the powerhead on the ground so
N
that it rests on the machine support.
Examine ends of drive tube for dirt
N
and clean them if necessary.
6
5
2
Push the lug (5) on the front drive
N
tube (2) into the slot (6) in the
coupling sleeve as far as stop.
7
1
When correctly installed, the red line (7)
(arrow point) must be flush with the end
of the coupling sleeve.
Tighten down the wing screw (1)
N
firmly.
Attach shoulder strap to the carrying
N
ring.
SP 92 TC