Table of Contents
Advertisement
Operation
EMU42702
Procedure for tilting down
1.
Push the power trim and tilt switch "
(up) until the outboard motor is support-
ed by the tilt rod and the tilt support lever
becomes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
UP
DN
DN
DN
66
"
EMU28063
EMU32852
Power trim and tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00261
NOTICE
"
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32923
Procedure for power trim and tilt models
1.
Place the remote control lever in neutral.
ZMU01936
ZMU04603
Shallow water
Advertisement
Table of Contents
