Starting Engine - Yamaha F150A2 Owner's Manual

Hide thumbs Also See for F150A2:
Table of Contents

Advertisement

1. Arrow
EMU27495

Starting engine

EWM01601
WARNING
Before starting the engine, make sure that
the boat is tightly moored and that you can
steer clear of any obstructions. Be sure
there are no swimmers in the water near
you.
EMU42431
Electric start and remote control models
EWM01841
WARNING
 Failure to attached engine shut-off cord
could result in a runaway boat if opera-
tor is ejected. Attach the engine shut-off
cord to a secure place on your clothing,
or your arm or leg while operating. Do
not attach the cord to clothing that
could tear loose. Do not route the cord
where it could become entangled, pre-
venting it from functioning.
 Avoid accidentally pulling the cord dur-
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power, the
boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
1.
If equipped with the Yamaha Security
System: If the lock mode of the Yamaha
Security System is selected, use the re-
mote control transmitter to select the un-
lock mode. Short beep will sound twice
when unlocking the Yamaha Security
System. For further information, see
page 26.
TIP:
 If you lost track of the current security
mode, press the lock or unlock button to
reset the security system.
 The signal transmission range of the re-
mote control transmitter varies depending
on the mounting position of the receiver. To
operate the Yamaha Security System cor-
rectly, use the transmitter as close as pos-
sible from the receiver.
 If Yamaha Security System may not oper-
ate correctly, repeat the activating proce-
dure once again.
2.
Place the remote control lever in " "
(neutral).
Operation
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fl150a2F150Lf150

Table of Contents