Table of Contents
Advertisement
Specifications and requirements
System with this outboard motor conforms to
European regulations only and not permitted
to use it outside europe. Consult your
Yamaha dealer for the appropriate system to
use in your location.
EMU33582
Remote control requirements
EWM01581
WARNING
If the engine starts in gear, the boat can
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.
If the engine ever starts in gear, the
start-in-gear protection device is not
working correctly and you should dis-
continue using the outboard. Contact
your Yamaha dealer.
The remote control unit must be equipped
with a start-in-gear protection device(s). This
device prevents the engine from starting un-
less it is in neutral.
EMU25695
Battery requirements
EMU44721
Specifications of Battery
Use a fully charged battery that meets the fol-
lowing specifications. The engine cannot be
started if battery voltage is too low.
16
For North America
Cold cranking amps (CCA/SAE):
512–1150 A
Marine cranking amps (MCA/ABYC):
675–1370 A
Min. reserve capacity (RC/SAE):
124 minutes
For Oceania
Cold cranking amps (CCA/EN):
510–1080 A
Min. rated capacity (20HR/IEC):
80 Ah
ECM01063
ZMU07305
NOTICE
Do not use a battery that does not meet
the specified capacity. If a battery that
does not meet specifications is used,
the electric system could perform poor-
ly or be overloaded, causing electric
system damage.
Do not use a battery which exceeds the
maximum CCA rating. If the batteries
are used in parallel circuit, use new bat-
teries of the same type and make sure
that the total battery rating never ex-
ceed the maximum CCA rating.
EMU36291
Mounting battery
Mount the battery holder securely in a dry,
well-ventilated, vibration-free location in the
boat. WARNING! Do not put flammable
items, or loose heavy or metal objects in
the same compartment as the battery.
Fire, explosion or sparks could result.
[EWM01821]
Advertisement
Table of Contents
