Table of Contents
Advertisement
Timer Recording
If you press QUICK PROGRAM/VCR Plus+, but the clock is not set,
Set the clock menu will appear. Set the clock manually.
If you have set the A/V Network to ACTIVE, point your remote
control at the TV when using Quick Program.
®
VCR Plus+
System Programming
®
The VCR Plus+
system allows you to program your VCR to record by simply
entering a PlusCode programming number. You can find this number in TV Guide
or possibly your local TV listings.
1
Load a tape with its erasure prevention tab intact into the VCR.
2
Press MENU. VCR Main Menu appears on your screen. Use the ADJUST
buttons to select Program to record. Press ENTER.
If the VCR memory is full, Program memory is full will appear for 3
seconds, and then the Recap screen will appear. Use CANCEL to
erase an entry before you can add another one.
If there is at least one programmed recording already entered, the Recap
screen will appear. Wait 4 seconds, and the VCR Plus+ Program to record
menu will appear.
3
VCR Plus+ Program to record menu will appear. Use the number buttons
on the remote control to enter the PlusCode number for the television
show you want to record. For example, if the PlusCode number for the
program you want to record is 5678, simply enter 5-6-7-8. See your local
newspaper or TV Guide for PlusCode numbers.
4
If you enter a number incorrectly, press CANCEL. When you have finished
entering the PlusCode number, press ENTER.
If the code number you entered is wrong, PlusCode Not a valid
number will display on the screen for 3 seconds, and then the VCR
Plus+ Program to record menu will reappear.
5
Use the ADJUST buttons to select whether you want to record your
program once, daily, or weekly.
• Once will record a program one time.
• Daily will record the same channel at the same time, Monday through
Friday.
• Weekly will record the same channel at the same time, on the same
day each week.
After you have made your choice, press ENTER.
If two programmed recording times overlap, VCR is already
programmed for that time will display on the screen. You will need to
erase the previous program before you can enter the new one.
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
ªVCR Main Menu
¬Program to record
PrograManager
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬Program to record
Use number keys to enter
the PlusCode number
5678----
Press ENTER when done.
Press CANCEL to erase
the PlusCode number.
Press MENU to go back.
¬Program to record
PlusCode number:5678
ƒOnce
ƒDaily
ƒWeekly
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
31
Advertisement
Table of Contents
