Editing Features; Using Two Vcrs To Copy - Mitsubishi HS-U776 Owner's Manual

Editing Features

Using Two VCRs to Copy

There are two basic ways to make a copy of a tape.
One way is to use the HS-U776 to record and another VCR for playback.
The other way is to use another VCR to record and use the HS-U776 for playback.
Regardless of which method you may choose, you will need one RCA audio cable and one S-video cable to connect the
two VCRs. If you do not have these cables, they are available at your local electronics dealer. You can use either a
standard RCA video cable or an S-video cable. The highest quality is achieved through an S-video cable.
Using the HS-U776 to record from another VCR
1 Connect the audio cable to AUDIO OUT L and R
on the playback VCR and to AUDIO IN L and R on
the HS-U776. If the playback VCR is mono, use
only the AUDIO IN L on the HS-U776.
2 If the playback VCR is standard VHS, connect a
video cable to VIDEO OUT on the playback VCR
and to the VIDEO IN on the HS-U776.
If the playback VCR is S-VHS, connect an S-video
cable to S-VIDEO OUT on the playback VCR and
to the S-VIDEO IN on the HS-U776.
3 If the playback VCR is Hi-Fi, set the audio monitor
to Stereo.
4 Use INPUT to set the HS-U776 to External 1
(L1) if you used the HS-U776 rear panel jacks, or
External 2 (L2) if you used the HS-U776 front
panel jacks.
HS-U776
S VIDEO VIDEO AUDIO IN
IN IN L/MONO R
S-VIDEO
L R
IN
VIDEO IN
36
RECORDING
AUDIO IN R
AUDIO IN L/MONO
5 Put a blank tape into the HS-U776. If you are
recording in S-VHS, be sure to use an S-VHS tape.
Make sure that the S-VHS record or S-ET record
in the S-VHS Set-Up menu is set correctly. See
page 24, Selecting Recording Format.
Make sure that the Front S-input or Rear S-input
in the S-VHS Set-Up menu is set correctly. See
page 25, Selecting S-input Setting.
6 Put the tape you want to copy into the playback
VCR and find the cue point. Press STOP if the
picture starts playing.
7 On the HS-U776, press REC, then PAUSE.
8 On the playback VCR, press PLAY, then PAUSE.
9 Press the PAUSE buttons on both VCRs at the
same time to begin copying the tape.
10 When finished, press STOP on both VCRs.
PLAYBACK
AUDIO OUT L
L
AUDIO OUT R
S-VIDEO OUT
R
VIDEO OUT