Table of Contents
Advertisement
Timer Recording
2
Complete steps 3 through 10 in Conventional VCR timer
recording. (See page 28.)
When you have finished, press QUICK PROGRAM/VCR Plus+
again.
If the VCR is stopped, it will turn off and be ready to record
your program at a later time.
If the VCR is playing, recording, fast forwarding or rewinding,
the menus will turn off, but the VCR power will remain on.
3
When you are finished with all programming, check the
following:
• If you have a cable box, a digital cable box, a
PRIMESTAR
®
the cable box or receiver turned ON.
• If your VCR does not control your cable box, leave the box
tuned to the station you wish to record.
• Make sure the VCR is turned OFF and the programmed
recording light is lit before the recording time.
If you press QUICK PROGRAM/VCR Plus+, but the clock
is not set, Set the clock menu will appear. Set the clock
manually.
®
VCR Plus+
The VCR Plus+
®
system allows you to program your VCR to record
by simply entering a PlusCode programming number. You can find
this number in TV Guide or possibly your local TV listings.
1
Load a tape with its erasure prevention tab intact into the VCR.
2
Press MENU. VCR Main Menu appears on your screen. Use
the ADJUST buttons to select Program to record. Press
ENTER.
If the VCR memory is full, Program memory is full will
appear for 3 seconds, and then the Recap screen will
appear. Use CANCEL to erase an entry before you can
add another one.
If there is at least one programmed recording already entered,
the Recap screen will appear. Wait 4 seconds, and the VCR
gold Plus+ Program menu will appear.
3
VCR gold Plus+ Program menu will appear. Use the number
buttons on the remote control to enter the PlusCode number for
the television show you want to record. For example, if the
PlusCode number for the program you want to record is 5678,
simply enter 5-6-7-8. See your local newspaper or TV Guide
for PlusCode numbers.
or a DISH Network
™
IMPORTANT
System Programming
IMPORTANT
satellite receiver, leave
¬Program to record
CH DAY
ON
§
2 TU14 11:30am
10 TH15
9:00pm
7 E-WE
8:00am
S125 FR16
5:30pm
8 TU20 11:00pm
S980 M-F
7:00pm
15 SU 1
8:00pm
46 SU18
7:00am
Recap screen
ªVCR Main Menu
Your choices are
¬Program to record
√Customize choices
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER
to enter
∑ ππADJUST to select
¬VCR gold plus+ Program
Use number keys to enter
the PlusCode number
5678----
Press ENTER when done.
Press CANCEL to erase
the PlusCode number.
Press MENU to go back.
OFF
1:30pm SP
10:00pm EP
9:00am EP
5:45pm EP
0:30am SP
7:15pm EP
9:00pm EP
9:00am SP
31
Advertisement
Table of Contents
