Channel Change Mode; Individual Acknowledgement; Position Acknowledgement - Furuno FM-4850 Operator's Manual

DSC SETUP

12.3 Channel Change Mode

This feature allows you to set the channel change mode of the radio. When
selecting "MANUAL", you need to manually change the channel. When you select
"AUTO", the radio automatically switches to the designated channel after 10
seconds without user intervention.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Go to "DSC SETUP > AUTO CHANGE CH".
Step 2
The following page appears on the screen.
Step 3 Select "MANUAL" or "AUTO".
Press the Menu/DSC control to save the setting and return to the
Step 4
previous screen.

12.4 Individual Acknowledgement

This feature allows you to set the acknowledgement mode of individual call
requests.
Press the Menu/DSC control until the "MAIN MENU" screen appears.
Step 1
Step 2 Go to "DSC SETUP > INDIVIDUAL ACK".
The "INDIVIDUAL ACK" page appears on the screen.
Select "MANUAL" or "AUTO".
Step 3

MANUAL: Select the soft key, and then you need to send an
acknowledgement manually upon a call request.

AUTO: Select the soft key, and then the radio sends an
unacknowledged message upon a call request.
Press the Menu/DSC control to save the setting and return to the
Step 4
previous screen.

12.5 Position Acknowledgement

This feature allows you to set the acknowledgement mode of position request calls.
FM-4850 Operator's Manual
70