Memory Scan + 16; Editing Memory Channel List - Furuno FM-4850 Operator's Manual

SCAN

6.4 Memory Scan + 16

Memory Scan + 16 mode scans all memory channels in sequence, and checks
CH16 after each programmed channel.
Note
Before you enable the Memory Scan +16 mode, at least one channel should be
set as the memory channel. For information about how to set memory channels,
see section 6.5 Editing Memory Channel List.
On the home screen, press the Menu/DSC control to enter the "MAIN
Step 1
MENU" screen.
Step 2 Go to "SCAN > MEMORY SCAN+16".
The radio starts to scan all memory channels in sequence, and checks
CH16 after each memory channel.
To stop scanning, press the Back key or the Menu/DSC control.
Step 3

6.5 Editing Memory Channel List

This feature allows you to add channels to or remove channels from the memory
channel list. Channels in the memory channel list are what the Memory Scan mode
scans.
How to add all channels to the memory channel list
On the home screen, press the Menu/DSC control to enter the "MAIN
Step 1
MENU" screen.
Go to "SCAN > EDIT MEMORY CH > SELECT ALL".
Step 2
"MEM" icons appear after each channel number.
Press the Back key to return to the previous screen.
Step 3
How to remove all channels from the memory channel list
When all programmed channels are added to the memory channel list, you can do
as follows to remove all channels from the list.
FM-4850 Operator's Manual
40