Table of Contents
Advertisement
5. Mount the coupling half on the motor shaft.
6. Balance complete assembly, that is, motor with the mounted coupling half.
Balance the motor when it is completely assembled with the coupling half. The aim is to
achieve the same vibration levels as the motor would exhibit without the coupling half.
7. Mount the motor on the headstock.
The coupling must exhibit an axial clearance of between 1.5 mm and 2.5 mm in order to
prevent constraining forces exerted by the motor/spindle assembly.
1PH3 main motors
Equipment Manual, 01/2021, A5E43087278-004
5.5 Installation as a direct drive for spindles
Mounting the motor
69
Advertisement
Table of Contents
