Table of Contents
Advertisement
Mechanical properties
3.1 Directives and standards
European RoHS Directive
The SIMOTICS motor series complies with the Directive 2011/65/EU regarding limiting the use
of certain hazardous substances.
WEEE Directive
The SIMOTICS motor series fulfills the EU Directive 2012/19/EU regarding the take-back and
recovery of waste electrical equipment.
Eurasian conformity
The 1PH3 motors comply with the requirements of the customs union
Russia/Belarus/Kazakhstan (EAC).
Underwriters Laboratories
SIMOTICS motors are generally in compliance with UL and cUL as components of motor
applications, and are appropriately listed.
Specifically developed motors and functions are the exceptions in this case. Here, it is
important that you carefully observe the contents of the quotation and that there is a cUL
mark on the rating plate!
Quality systems
Siemens AG employs a quality management system that meets the requirements of ISO 9001
and ISO 14001.
Certificates for the 1PH3 motors can be downloaded from the Internet at the following link:
Certificates for the 1PH3 motors
(https://support.industry.siemens.com/cs/products?search=1PH3&dtp=Certificate&mfn=ps&o
=DefaultRankingDesc&pnid=13347&lc=en-WW)
China RoHS
SIMOTICS motors comply with the China RoHS.
You can find additional information at:
China RoHS (https://support.industry.siemens.com/cs/ww/en/view/109772252)
30
Equipment Manual, 01/2021, A5E43087278-004
1PH3 main motors
Advertisement
Table of Contents
