Related Manuals for EchoStar DSB-2200 2Ci Viaccess
Summary of Contents for EchoStar DSB-2200 2Ci Viaccess
-
Page 1: User Manual
USER MANUAL EchoNAV User Interface for Digital Satellite Receivers fixed Printed on recycled paper... - Page 2 Issue: echonav_fixed_b_1a_us © 2001 EchoStar International Corporation - The Netherlands We encourage you to express your thoughts on this user manual. Please send your comments to: EchoStar International Corporation Technical Publications Department Schuilenburglaan 5a 7604 BJ Almelo The Netherlands...
-
Page 3: Preface
PREFACE INTRODUCTION This manual is part of the documentation set that is delivered with your EchoStar Digital Satellite Receiver (fixed models). This manual gives an explanation and an instruction on the use of the EchoNAV user interface. This manual describes all features of the EchoNAV user interface family for the: DSB-2200 2Ci Viaccess, DSB-2200 2Ci, DSB-1200 Viaccess, DSB-808 2Ci Viaccess, DSB-808 2Ci, DSB-707 Viaccess, DSB-707 FTA. - Page 4 To deal with all these channels and the changing way that people watch TV, the software engineers at EchoStar have resurrected the tried and true channel list approach of the venerable LT-8700 and enhanced it to deal with the demanding requirements of today's world.
- Page 5 Throwing a party but you don't want to be bothered with changing the CDs after every song? EchoStar's DVR-7000 has a digital audio jukebox which can store up to 500 songs. Five hundred songs is somewhat more than 15 hours of music and while that is plenty to cover most parties the real beauty is again in the lists.
-
Page 6: Table Of Contents
TO SOLVE A TV OR RADIO RELATED PROBLEM TO SOLVE A RCU RELATED PROBLEM TO SOLVE AN INSTALLATION RELATED PROBLEM Glossary LIST OF USED ABBREVIATIONS EXPLANATION OF USED TERMINOLOGY EXPLANATION OF THE SEARCH MODES Index Page 4-10 4-13 4-14 5-12 EchoStar International Corporation... -
Page 7: Installation
INSTALLATION THE INITIAL GUIDED SETUP MENU C 1..4 IXED AND Languages TV System User Profile Local Time System Setup Check Signal Search Channels OR MOVEABLE DISH INSTALLATIONS Languages TV System User Profile Local Time System Setup Program Satellites Search Channels EcoNAV User Interface SWITCH INSTALLATIONS To set the language you want to use in the menus. -
Page 8: To Setup Your Receiver For The First Time
To select the distribution type To set the symbol rates you want to scan. Wait for the search to complete. arrow keys to go through the selectable menu items. arrow keys to navigate between the left and right column of EchoStar International Corporation... - Page 9 7. Make the required selections. 8. Read the available help text for information. Note that only the white fields are selectable, other fields show reference information. 9. Go to the Continue field. 10. On the RCU, press the OK key to advance. 11.
- Page 10 Note that only the white fields are selectable, other fields show reference information. 23. Go to the Program Satellites field. 24. On the RCU, press the OK key to advance. Page 3 - 4 SWITCH INSTALLATIONS C 1.2) EchoStar International Corporation...
- Page 11 25. Wait for the Checking Configuration to complete. 26. Make the required selections. 27. Read the available help text for information. 28. Monitor the signal indicator for best signal when you set the location. 29. On the RCU, press OK to save the setting. 30.
- Page 12 Installation Section 3 Page 3 - 6 EchoStar International Corporation...
-
Page 13: Familiarization
FAMILIARIZATION THE USER PREFERENCES MENU button gives you access to the User Preferences menu; User Profile Languages Parental Lock Change PIN Code Local Time TV System 1.1. USER PROFILE PAGE NAV F - 2C IXED NAV F IXED EchoNAV User Interface Familiarization To set the screen size of the TV. - Page 14 New password To type in your new PIN code (numbers only). Verify password To type in your New password again. Now the receiver verifies the new password to make sure that you typed in the new password correctly. EchoStar International Corporation...
- Page 15 1.4. LOCAL TIME PAGE NAV F IXED RECEIVERS WITH DISPLAY This menu page allows you to customize the local time settings. For the correct operation of the EPG and the timers, it is necessary to set the local time correctly. You can customize: NAV F IXED RECEIVERS WITHOUT DISPLAY...
-
Page 16: The Installation Setup Menu
To enter the frequencies of the user LNB. To select the device that controls the polarity. To set the control signals. In the About EchoStar information menu you can look up the factory and receiver information. To select the default or user defined satellite where you want to download from. -
Page 17: System Setup Menu
To enter the frequencies of the user LNB. To select the device that controls the polarity. To set the control signals. In the About EchoStar information menu you can look up the factory and receiver information. To select the default or user defined satellite where you want to download from. - Page 18 LNB1 To set the LNB type(s) you use. Satellite To set the satellite you want to scan for the LNB. Check Signal To confirm the selections you made and advance to the Check Signal page. EchoStar International Corporation...
- Page 19 2.3. PROGRAM SATELLITES OR MOVEABLE DISH INSTALLATIONS This sub menu allows you to customize your DiSEqC1.2 system setup to add an additional satellite into your receiver. Note that the menu page is dynamic which means that it changes with the selections you make. You can customize and view: 2.4.
-
Page 20: Factory Reset
You can view: 2.6. SYSTEM UPGRADE PAGE This menu page allows you to upgrade the receiver’s software. EchoStar provides software updates Over-The-Air (OTA) which means that you can upgrade your system via the satellite. If you are not able to receive the satellite/transponder, you always can upgrade the software through the SERIAL PORT (RS232) at the rear of the receiver and the downloaded software from the EchoStar website. -
Page 21: The Conditional Access Menu
CI-module and related smart card. Note that this page can show differently for other CI- modules and related smart cards. EchoStar has no control over the information provided by the related service provider, therefor no specific information is given. Viaccess Embedded... -
Page 22: The Echonav Mode And Selection Menus
CI-module and related smart card. Note that this page can show differently for other CI- modules and related smart cards. EchoStar has no control over the information provided by the related service provider, therefor no specific information is given. IACCESS... - Page 23 4.2. LIST The Lists are available in the all modes. Some of the lists are factory defined and other lists (Favorite lists) are user defined. Favorite lists are lists of your favorite items that are created and maintained by you. In every mode you can setup a number of favorite lists. The lists available are (mode dependent): NOTE Sometimes a list seems to be empty because of the settings of the group and sort...
- Page 24 Shows list with entered character only. Word Shows a list that contains the selected word only. Scrambled Shows a list of encrypted channels only. Shows a list of Free-To-Air channels only. Locked Shows a list of locked channels only. EchoStar International Corporation...
-
Page 25: The Electronic Program Guide (Epg)
THE ELECTRONIC PROGRAM GUIDE (EPG) Mode, to select the TV or Radio mode to show; List, to select the list in all channels, current satellite or personal favorite; Date, to access the EPG calendar; Timers, to select and set the VCR or Reserved timer; Zoom, to expand or shrink the EPG window as a function of the time slot. -
Page 26: The Infobanner And Pop-Up Menus
If the volume +/- key is pressed, the volume button is shown (see the radio InfoBanner). 6.2. THE RADIO INFOBANNER The radio InfoBanner shows the information related to the actual channel. The radio InfoBanner can show the same information as discussed with the TV InfoBanner. Page 4 - 14 EchoStar International Corporation... - Page 27 6.3. POP-UP MENUS Some pop-up menus are used to show that the receiver is busy to execute a task. Other pop- up menus require interaction with the user, you have to confirm or deny a earlier given command to complete the task 6.3.1.
- Page 28 Familiarization Section 4 Page 4 - 16 EchoStar International Corporation...
-
Page 29: Operation
OPERATION TO NAVIGATE THROUGH THE MENUS NOTE Unless otherwise specified; this note explains the way you can navigate through the pages of the EchoNAV user menu. 1. Use the OK key to pull down the menu selection fields. 2. Use the 3. - Page 30 OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. Page 5 - 2 EchoStar International Corporation...
- Page 31 1.6. TO EDIT A LIST 1. On the RCU, press the OK key. 2. Select the required list. 3. On the RCU press the WHITE key. 4. Read the available help text for information. 5. Select the required edit option. NOTE Some EDIT options are not always available.
-
Page 32: To Delete A Channel
5. If you want to undo the selection, press the OK key again. 6. Either: a. press the WHITE key to confirm the deletion and end the session, or b. select the next channel you want to delete. Page 5 - 4 EchoStar International Corporation... - Page 33 1.10. TO SET THE CHANNEL VOLUME OFFSET 1. In the Edit menu, select the VOLUME option. 2. Read the available help text for information. 3. Go to the channel you want to edit. 4. On the RCU, use the 5. Either: a.
- Page 34 Enter the correct PIN-code as requested; d. Set the Master Hide to Off. 10. You can restore all the hides on the channels: 11. In the parental lock menu, set the Master Hide to Page 5 - 6 EchoStar International Corporation...
-
Page 35: Use The Favorite Lists
The main difference is that you can setup and organize the favorite lists as required. EchoStar has already pre-named the favorite lists to help you getting started. It is however possible to change the name of the favorite list to something that is meaningful to you. - Page 36 OK to accept the character; c. select the button to get lower case characters and numbers; d. select the button e. on the RCU, press the OK key to confirm. Page 5 - 8 EchoStar International Corporation...
-
Page 37: To Use The Electronic Program Guide (Epg)
The EPG information is not always available. Sometimes the service provider (who sends the EPG information) supplies only the program name, the now/next informa- tion or sometimes nothing at all. EchoStar has no influence on this matter. Make sure the local time is set otherwise you can not view EPG information because it needs the correct time (Refer to the Local Time menu). - Page 38 12. Change the status: a. use the key, to go to the status; b. read the available help text for information; c. press the keys to set the status. Page 5 - 10 EchoStar International Corporation...
-
Page 39: Delete A Timer
13. Save the timer: a. use the key, to go to the Store Settings; b. read the available help text for information; c. press the OK key to confirm the settings. 14. Note the clock that appeared in your program. 15. -
Page 40: To Set The User Preferences
4. On the RCU: a. press the MENU key to save the settings; b. press the EXIT key to leave the menu. Page 5 - 12 key. key. key. Conditional Access button in the main menu bar. menu; menu. EchoStar International Corporation... -
Page 41: To Set The Parental Lock
4.2. TO CHANGE THE LANGUAGE 1. On the RCU, press: a. the MENU key; b. the key to select the c. the OK key, to select the 2. Press the OK key and make the selections. 3. Read the available help text for information. 4. -
Page 42: To Set The Local Date And Time
MENU key to save the settings; b. press the EXIT key to leave the menu. Page 5 - 14 RECEIVER WITH DISPLAY menu; menu. RECEIVER WITHOUT DISPLAY menu; menu. RECEIVER WITHOUT DISPLAY menu; menu. EchoStar International Corporation... - Page 43 4.7. TO SET THE TV SYSTEM 1. On the RCU, press: a. the MENU key; b. the key to select the c. the OK key, to select the 2. Press the OK key and make the selections. 3. Read the available help text for information. 4.
- Page 44 Operation Section 5 Page 5 - 16 EchoStar International Corporation...
-
Page 45: Maintenance
MAINTENANCE SOFTWARE MAINTENANCE - INSTALLATION NOTE FTA (Free-To-Air) receivers have no conditional access capabilities. If shown, please ignore the NOTE Unless otherwise specified; This note explains the way you can navigate through the maintenance pages of the EchoNAV setup menu. 1. -
Page 46: To Change The User Lnb Settings
CAN DAMAGE THE RECEIVER PERMANENTLY NOTE EchoStar offers on a regular basis software updates via the satellite and the EchoS- tar website. If you have trouble to get a download with the latest software version, please ask your retail seller or dealer for assistance. -
Page 47: Software Maintenance - Conditional Access
1.5. TO DO A FACTORY RESET NOTE Be sure if you select Memory Erase because all your personal settings will be deleted and replaced with the factory settings. Some of the personal settings that will be deleted are Parental Lock, Favorite lists and System setup. Memory erase resets the receiver as if the receiver comes just out of the box. -
Page 48: Satellite List Maintenance
5. On the RCU, use the numeric keys to enter the Position. 6. Select the Location. 7. On the RCU, press the white key. Page 6 - 4 IACCESS menu; menu. Conditional Access button in the main menu bar. EchoStar International Corporation... -
Page 49: Transponder List Maintenance
8. Enter the required settings. 9. Read the available help text for information. 10. Go to the continue field. 11. On the RCU, press the OK key to advance. 12. Make the required selections, it is advised to select the search mode as TP. 13. -
Page 50: Pid Data Maintenance
Select Edit = Add PID 3. On the RCU, press the OK key. 4. Select the applicable transponder. 5. On the RCU, press the OK key. Page 6 - 6 Conditional Access button in the main menu bar. EchoStar International Corporation... - Page 51 6. Enter the required settings. 7. Read the available help text for information. 8. Monitor the signal indicator and make sure that you have sufficient signal strength and quality. 9. Go to the Store Settings field. 10. On the RCU: a.
- Page 52 Maintenance Section 6 Page 6 - 8 EchoStar International Corporation...
-
Page 53: Troubleshooting
TROUBLESHOOTING TO SOLVE A GENERAL PROBLEM NAV F IXED RECEIVERS WITH DISPLAY Problem 1. Nothing appears on the receiver display. 2. The display shows a flashing - - : - - 3. You have forgotten the personal PIN-code. NAV F IXED RECEIVERS WITHOUT DISPLAY Problem... -
Page 54: To Solve A Tv Or Radio Related Problem
The group or sort option is set. You are in the wrong list. The channel is hidden. You have selected an empty (favorite) list. EchoStar International Corporation Switch the receiver on. Check the cable connections and do any necessary work. Make sure the dish and LNB are correctly adjusted. - Page 55 OR CONDITIONAL ACCESS Problem 1. No picture or sound in the TV or radio mode. 2. Bad picture or noisy sound in the TV or radio mode. 3. The TV shows a No Signal message. 4. There is no Dolby digital (AC-3) sound to my other equipment.
-
Page 56: To Solve A Rcu Related Problem
You have selected the incorrect satellite to search channels on. You have selected the incorrect search method. EchoStar International Corporation Insert new batteries. Close the sun blinds or get closer to the receiver. Aim at the receiver display. -
Page 57: Glossary
(the satellite receiver) onder ision econd requency assette ecorder sion peak-peak rootmeansquare imit eight x epth Page 8 - 1... -
Page 58: Explanation Of Used Terminology
A signal frequency range (11.70-12.40ghz) intended for direct TV broadcast by satellite channels. A unit that is connected to a satellite receiver in order to unscramble a picture that is protected by encryption. Standard which describes the method of transmitting digital audio. - Page 59 LNBF MPEG Near Video-On-Demand Network NTSC Parental lock Pay-Per-Channel Pay-Per-View Pay TV PIN-code Polarization Polarizer Polarmount Receiver RS232 connection Satellite SCART cable EchoNAV User Interface A LNB with an integrated Feedhorn. So the LNBF comes as one single unit. The Moving Picture Experts group is founded by the ISO to provide a basis for the coding and compression of moving pictures.
-
Page 60: Explanation Of The Search Modes
Equipment inside a satellite responsible for receiving a single uplinked channel and rebroadcasting it back to Earth. In the satellite industry, vertical is used to indicate the direction in which the received signal is polarized. Normally you will find that it is abbreviated as V. EchoStar International Corporation... - Page 61 INDEX about echostar page ... 6-2 ... 5-7 a channel to a favorite list ... 6-6 ... 6-4 ... 6-5 alternate audio ... 4-14 icon ...4-15 selection alternate subtitling ... 4-14 icon ...4-15 selection bad picture ...7-2 blue key ... 5-2 change ...
- Page 62 ... 4-7 user preferences menu ... 4-1 user profile page ... 4-1 vcr timer ... 4-13 volume button ... 4-14 white key ... 5-3 wintertime ... 5-14 yellow key ... 5-2 zoom ... 4-13 5-11 5-10 EchoStar International Corporation...