Delete A Timer - EchoStar DSB-2200 2Ci Viaccess User Manual

13. Save the timer:
a. use the
b. read the available help text for information;
c. press the OK key to confirm the settings.
14. Note the clock that appeared in your program.
15. Do not forget to program also your VCR.
If the timer screen does not disappear, you have set a
timer in the past or for a running program. Revise
either date, start or stop time to a time in the future

3.2. DELETE A TIMER

1. On the RCU:
a. press the EPG key;
b. press the GREEN key;
c. select from the list: Timers;
d. press the OK key.
2. Select the applicable timer and press the OK key.
3. Change the status:
a. use the
b. read the available help text for information;
c. press the key to set the status to inactive.
4. Delete the timer:
a. use the
b. read the available help text for information;
c. press the OK key to confirm the deletion.
3.3. USE THE INFOBANNER RELATED FUNCTIONS
1. On the RCU, press the i-key.
2. If available, allow the receiver to collect the EPG
information for the selected channel.
3. If the i-button in the InfoBanner is shown,
use the i-key on the RCU to shift between the
detailed program information and the InfoBanner.
4. On the RCU, press the EXIT key to remove the
InfoBanner from the screen (only in TV-mode).
3.4. TO SELECT THE ALTERNATE AUDIO
1. On the InfoBanner, find the alt audio symbol.
2. On the RCU, press the
3. In the Alt. Audio pop-up menu, select the required
alternate audio.
Note that alternate audio information is provided by
the service provider.
4. On the RCU, press the
EchoNAV User Interface
key, to go to the Store Settings;
key, to go to the status;
key, to go to the Store Settings;
key.
key twice.
Operation
Section 5
Page 5 - 11
5