Software Maintenance - Conditional Access - EchoStar DSB-2200 2Ci Viaccess User Manual

1.5. TO DO A FACTORY RESET
NOTE
Be sure if you select Memory Erase because all your personal settings will be
deleted and replaced with the factory settings. Some of the personal settings that
will be deleted are Parental Lock, Favorite lists and System setup. Memory erase
resets the receiver as if the receiver comes just out of the box.
1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. Go to the Confirm Reset field.
5. On the RCU, press the OK key.
6. Wait for the Languages initial setup menu to appear.
7. Do the initial setup, refer to the section Installation
for detailed instructions.
2.

SOFTWARE MAINTENANCE - CONDITIONAL ACCESS

NOTE
FTA (Free-To-Air) receivers have no conditional access capabilities.
If shown, please ignore the
2.1. TO GET CONDITIONAL ACCESS INFORMATION
F 2C
OR I
1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. Press the OK key and make the selections.
3. Read the available help text for information
F E
OR MBEDDED
1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. Press the OK key and make the selections.
3. Read the available help text for information.
EchoNAV User Interface
menu;
menu.
Conditional Access button in the main menu bar.
menu;
menu.
V
IACCESS
menu;
menu.
Maintenance
Section 6
Page 6 - 3
6