Maintenance; Software Maintenance - Installation - EchoStar DSB-2200 2Ci Viaccess User Manual

MAINTENANCE

1.

SOFTWARE MAINTENANCE - INSTALLATION

NOTE
FTA (Free-To-Air) receivers have no conditional access capabilities.
If shown, please ignore the
NOTE
Unless otherwise specified; This note explains the way you can navigate through
the maintenance pages of the EchoNAV setup menu.
1. Use the OK key to pull down the menu selection fields.
2. Use the
3. In a pull-down menu, use the OK key to confirm the selection.
4. Use the
selectable menu items.
5. Use the EXIT key to leave the menu and return to the live mode.
1.1. TO CHANGE THE SETUP OF THE RECEIVER
1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. Go to the Check Signal field.
5. On the RCU, press the OK key.
6. Wait for the Check Signal page to appear.
7. In the Check Signal menu make the required
selections for transponder and search mode.
8. Read the available help text for information.
9. If the red dot in the transponder field stays:
a. select another transponder;
b. go to the check signal field;
c. on the RCU, press the OK key.
10. Go to the Search Channels field.
11. On the RCU, press the OK key.
12. Wait for the search to complete:
a. the receiver display shows a moving dot;
b. the search completed popup menu appears.
13. On the RCU:
a. press the OK key to save the settings;
b. press the EXIT key to leave the menu.
EchoNAV User Interface
Conditional Access button in the main menu bar.
arrow keys to go through the selectable menu items.
arrow keys to navigate between the left and right column of
menu;
or menu.
Maintenance
.
Section 6
6
Page 6 - 1