To Setup Your Receiver For The First Time - EchoStar DSB-2200 2Ci Viaccess User Manual

Installation
Section 3
F SMATV
OR INSTALLATIONS
Languages
TV System
User Profile
Local Time
System Setup
Search Channels
2.

TO SETUP YOUR RECEIVER FOR THE FIRST TIME

This procedure will guide you step-by-step through the initial setup of the receiver. After you
have finished the initial installation, these pages are accessible through the icons in the menu
bar which is in the initial setup not shown.
NOTE
Unless otherwise specified; This note explains the way you can navigate through
the pages of the EchoNAV initial setup menu.
1. Use the OK key to pull down the menu selection fields.
2. Use the
3. In a pull-down menu, use the OK key to confirm the selection.
4. Use the
selectable menu items.
5. Use the EXIT key to leave the menu and return to the live mode.
1. Switch on the TV.
2. On the receiver, press the on/standby button.
3. Make the required selections.
4. Read the available help text for information.
5. Go to the Continue field.
6. On the RCU, press the OK key to advance.
Page 3 - 2
I
To set the language you want to use in the menus.
I
To set the language for programs with bi-lingual audio.
I
To set the language for bi-lingual subtitled programs.
I
To set the (UHF) TV channel to which the receiver is
connected.
I
To set the video format supported by your TV.
I
To set the screen size of the TV.
I
To set the view time for the InfoBanner.
I
To tell the receiver that it is connected to a Dolby Digital
amplifier or not.
I
To set the time zone where you are.
I
To set the actual date.
I
To set the actual time.
I
To set the dish type you use (SMATV).
I
To select the distribution type
I
To set the symbol rates you want to scan.
I
Wait for the search to complete.
arrow keys to go through the selectable menu items.
arrow keys to navigate between the left and right column of
EchoStar International Corporation