EchoStar DSB-2200 2Ci Viaccess User Manual page 31

1.6. TO EDIT A LIST
1. On the RCU, press the OK key.
2. Select the required list.
3. On the RCU press the WHITE key.
4. Read the available help text for information.
5. Select the required edit option.
NOTE
Some EDIT options are not always available.
If an option is not presented, select Group - None and Sort - None
1.7. TO MOVE A CHANNEL
1. In the Edit menu, select the Move option.
2. Read the available help text for information.
3. Go to the channel you want to move.
4. On the RCU, press the OK key.
Note a red bullet appears behind the selection.
5. If you want to undo the selection, press the OK key
again.
6. Move the channel, either:
a. use the
b. use the page + / - keys;
7. On the RCU, press the OK key to confirm.
8. Either:
a. press the WHITE key to end the session, or
b. select the next channel you want to move.
1.8. TO LOCK A CHANNEL
CAUTION
You can only lock a channel if you have set the parental lock and the PIN-code
correctly. We recommend, in the parental lock menu, that you check if the lock
option is set correctly.
NOTE
After you have set a lock onto a channel, the installation and the EDIT menu are
automatically locked with an installation lock to prevent unauthorized access.
Now you can only access these functions if you know the correct PIN-code.
EchoNAV User Interface
keys;
Operation
Section 5
Page 5 - 3
5