Transponder List Maintenance - EchoStar DSB-2200 2Ci Viaccess User Manual

8. Enter the required settings.
9. Read the available help text for information.
10. Go to the continue field.
11. On the RCU, press the OK key to advance.
12. Make the required selections, it is advised to select
the search mode as TP.
13. Read the available help text for information.
14. Monitor the signal indicator and make sure that you
have sufficient signal strength and quality.
15. After you found the location, press the OK key to
confirm the position.
16. Go to the Search Channels field.
17. On the RCU, press the OK key to advance.
18. Wait for the search to complete:
a. the receiver display shows a moving dot;
b. the search completed popup menu appears.
19. On the RCU:
a. press the OK key to end the procedure;
b. press the EXIT key to return to live video.
4.

TRANSPONDER LIST MAINTENANCE

NOTE
FTA (Free-To-Air) receivers have no conditional access capabilities.
If shown, please ignore the
4.1. TO ADD A TRANSPONDER
1. Select a channel of the satellite to which you want
to add a transponder.
2. On the RCU, press:
a. the OK key;
b. Select Mode = TV
c. Select List = All Channels
d. Select Group = None
e. Select Sort = None
f. Select Edit = Add TP
3. On the RCU, press the OK key.
EchoNAV User Interface
Maintenance
Conditional Access button in the main menu bar.
Section 6
6
Page 6 - 5