32
8
Media
Q
V
Table 8:
8.2
Device Dimensions
Fig: 15 Device dimensions
Thickness endless material
heat shrink tubing (pressed)
heat shrink tubing (not pressed)
Label feed
•
Small label sizes, thin materials or strong glue can lead to limitations.
Critical applications need to be tested and cleared.
•
Note the bending stiffness ! Material must be flexible to follow the radius of the print
roller!
•
For narrow materials a higher minimum thickness is required, e.g. Q = 0,4 at C = 5 !
Label / endless material dimensions
32
0,055 - 0,8
< 0,8
< 4,5
> 7