Table of Contents
Advertisement
3
Control Panel
3.3
Printer States
State
Ready
Printing label
Pause
Correctable error
Irrecoverable error
Critical error
Power Save Mode
Table 2:
Printer states
Display
Ready
and configured symbol dis-
plays,
such as time
and date
Printing label
and the number of the printed label in
the print job.
Pause
and the symbol
and the type of error
and the number of labels still to
be printed.
and the type of error
and the number of labels still to
be printed.
and the type of error
and the key lighting is switched
off
Description
The printer is in the ready state
and can receive data.
The printer is currently process-
ing an active print job.
Data can be transmitted for a new print
job.
The new print job will start when the pre-
vious one has finished.
The printing process has been in-
terrupted by the operator.
An error has occurred that can be rectified
by the operator without interrupting the
print job.
The print job can be continued after
the error has been rectified.
An error has occurred that cannot
be rectified without interrupting
the print job.
An error occurs during the system
test.
Switch the printer off and then on
again at the power switch or
Press cancel key.
Call Service if the fault occurs per-
sistently.
If the printer is not used for a
lengthy period, it automatically
switches to power save mode.
To exit power save mode: Press
any key on the navigator pad.
9
Advertisement
Table of Contents
